FA-MD Series Metal Detector – Reliable Foreign Body Control for All Kinds of Packaged Food
For food manufacturers around the world, metal contamination is one of the biggest threats to product safety, brand reputation and retail compliance. Even tiny metal fragments can lead to product recalls, market penalties and permanent damage to consumer trust. To solve this problem, Shanghai Fanchi-tech Machinery Co., Ltd. provides the FA‑MD series metal detector with stable performance, high detection sensitivity and food‑grade standard design, which has been widely used in bakery, snack, frozen food, prepared food and other packaged food production lines.
This case shares the practical application of FA‑MD metal detector in BakeBest Food Ltd., a medium‑sized baked food manufacturer in the EU, to show its real performance and value in actual production.
The Customer’s Pain Points Before Using FA‑MD
BakeBest Food Ltd. mainly produces all kinds of packaged bread, cakes, cookies and pastries, with a daily output of more than 60,000 packs. Before cooperating with Fanchi‑tech, the company used an old‑style metal detector, which had been unable to meet its production and safety needs:
- High false reject rate
The high sugar, oil and protein ingredients in baked goods caused serious interference to the old equipment, resulting in frequent false alarms. About 8% of qualified products were wrongly rejected every day, causing serious waste of raw materials and increasing production costs.
- Insufficient detection sensitivity
The old machine could not stably detect small metal fragments below 1.2 mm, while metal residues from mixing, cutting and packaging equipment were usually between 0.6 mm and 1.0 mm, which brought great hidden dangers to food safety.
- Difficult to clean and poor hygiene level
The frame and conveyor belt of the old equipment were not designed for food hygiene standards. It was easy to accumulate cake crumbs and oil dirt, which could not adapt to daily cleaning and disinfection, and was repeatedly warned during BRC and food safety audits.
- Complicated operation and low efficiency
When switching between different products, it needed long‑time manual adjustment and calibration, which seriously affected the production line speed and order delivery efficiency.
After a small metal fragment was found in a batch of products in 2025, the company decided to completely replace the metal detection equipment and finally chose Fanchi‑tech FA‑MD series metal detector after many comparisons and on‑site tests.
FA‑MD Metal Detector: Customized Solution for Packaged Food
Fanchi‑tech FA‑MD series metal detector is a professional metal detection equipment designed for medium and small packaged food. It adopts standard food‑grade flat conveyor belt, full 304 stainless steel body, compact structure, easy to install and integrate into various automatic packaging lines. The equipment is not plate chain type, but adopts smooth, stable and easy‑to‑clean conveyor belt, which is especially suitable for bakery, snacks, frozen food and other conventional packaged products.
1. High Sensitivity & Low False Rejection Rate
FA‑MD adopts dual‑frequency digital detection technology and intelligent anti‑interference algorithm, which can effectively suppress the product effect interference of high sugar, high oil and high moisture food.
- Ferrous metal: ≥ 0.6 mm
- Non‑ferrous metal: ≥ 0.8 mm
- Stainless steel: ≥ 1.0 mm
In BakeBest’s actual production, the false reject rate was reduced from 8% to less than 0.9%, which greatly reduced product waste.
2. Food‑grade Hygienic Design
- The whole machine is made of 304 stainless steel, with smooth and seamless surface, no dead angle and no dirt accumulation.
- Food‑grade flat conveyor belt, waterproof and oil‑resistant, easy to disassemble and clean.
- IP65 protection grade, can withstand daily water washing and disinfection, fully meet EU food hygiene and BRC audit requirements.
3. Easy Operation & High Production Efficiency
- 7‑inch touch screen control panel, simple and intuitive operation.
- Built‑in storage of more than 30 groups of product parameters, one‑key switching between different products, only takes about 20 seconds.
- Stable conveying and automatic rejection system, no jamming, no damage to packaged products, matching high‑speed production lines.
4. Complete Compliance & Traceability
FA‑MD supports automatic recording of detection data, alarm records and production logs, which can be exported at any time for audit. It meets EU food safety standards, CE certification and other mainstream market access requirements, helping manufacturers easily cope with customer and third‑party audits.
Actual Application Results of BakeBest Food Ltd.
After 7 months of stable operation, Fanchi‑tech FA‑MD metal detector has brought obvious improvement to BakeBest:
- Successfully intercepted 24 pieces of tiny metal foreign bodies (including 0.6–1.0 mm stainless steel and iron scraps), completely avoiding product recall risks.
- False reject rate decreased by nearly 90%, saving a lot of raw material costs every month.
- Production line efficiency increased by 15%, fast product switching and stable operation reduce downtime.
- 100% pass rate in food safety audits, no hygiene and detection non‑conformity items, and successfully renewed long‑term supply contracts with large retail customers.
“The FA‑MD metal detector from Fanchi‑tech is stable, sensitive and easy to clean. It perfectly solves our metal detection problems. We are very satisfied with this cooperation,” said the quality director of BakeBest Food Ltd.
Why Choose Fanchi‑tech FA‑MD Metal Detector
- Suitable for all kinds of packaged food, standard flat conveyor belt, not plate chain type, wide application range.
- High detection sensitivity, low false reject rate, strong anti‑interference ability.
- Food‑grade 304 stainless steel, hygienic design, easy to clean and maintain.
- Compact structure, easy to integrate into various packaging lines.
- Comply with EU, FDA, BRC and other international food safety standards.
- Professional after‑sales support and global technical service.
Contact Fanchi‑tech for Your Food Safety Solution
If you are looking for a reliable, high‑performance and hygienic metal detector for packaged food, welcome to contact Fanchi‑tech. We can provide on‑site testing, parameter customization and complete after‑sales support.
Shanghai Fanchi-tech Machinery Co., Ltd.
Contact Person: Kerry Wang
Email: fanchitech@outlook.com
Contact Person: Kerry Wang
Email: fanchitech@outlook.com
Post time: Feb-11-2026